Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

VOLUND GEARWORKS COBRA AESIR BELT

$65.00
Quantity:

Product Description

MADE IN OHIO

BELTS ARE IN STOCK AND READY TO SHIP

The Aesir series of belt is a non-overlapping design with buckles that match the width of the main belt body. Where the Atlas belts use narrower 1" buckles on wider belt bodies that must overlap to use..

The STANDARD option is a single layer of stiff scuba webbing as the core, sandwiched between two layers of 1.5" flat webbing, with a soft tail to make adjustments quick and easy. The main belt body is basically the same as our standard Atlas belts without the 1" trim webbing. A comfortable belt that will move with your body while still giving great support for IWB carried items and the less brick-like OWB gear.

The Cobra Buckle to get the durable and easy to use side releasing buckle, making the belt very fast to open and close. From use it was also found that the wider buckle will also "trap" items carried close to the center line (blades, magazines, etc) when the belt is opened up to answer the call of nature. The wider buckle also tends to catch on the first belt loops on most pants so the belt itself wont slip out of the belt loops when unbuckled and the pants removed.

The end of the tail is now ROUNDED rather than one corner notched so the belt can be threaded either way around the body with no sharp edge to poke you.

SIZING: Sizing is a little different from the Atlas series. Due to the non-overlapping design there is a little less adjustment range. The body is followed by a softer tail with a small section of hook material to trap the tail to the belt body after cinching. The soft tail also makes fine adjustments quick and easy.

It's best to take an actual measurement over top where the belt will ride including anything tucked in; holsters, shirt, etc.

The smaller size number equates to roughly the actual length of the belt when cinched all the way down and the larger number is opened up to where the tail will still stick to the loop field; in a pinch the belt can open up wider but the tail will simply hang free, giving the option for occasional use with bulky winter layers.

IMPORTANT PLEASE READ
Sizes in INCHES (NOT PANT SIZE) Please measure around your belt with your EDC Load out.
I wear a 33 inch pant size and wear a (Medium 34 -38 belt)

SMALL 32-36

MEDIUM 34-38

LARGE 36-40

X-LARGE 38-42

XX-LARGE 40-44

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the VOLUND GEARWORKS COBRA AESIR BELT to your wish list.